Altera Home Page
Literature Licensing
Buy On-Line Download

  Home   |   Products   |   Support   |   End Markets   |   Technology Center   |   Education & Events   |   Corporate   |   Buy On-Line  
  Knowledge Database   |   Devices   |   Design Software   |   Intellectual Property   |   Reference Designs   |   Design Examples   |   mySupport  

 Products
      MAX/MAX II
      Stratix/Stratix GX
      Nios II
  
 Functionality
      Arithmetic
      Memory
      Bus & I/O
      Logic
      Interfaces & Peripherals
      DSP
      Communications
      PLL & Clocking
  
 Design Entry
      Quartus II Project
      Tcl
      VHDL
      Verilog HDL
      C Code Examples
      DSP Builder
      TimeQuest
   On-Chip Debugging
  
 Simulation Tools
      Mentor Graphics ModelSim
      Cadence NCsim
      Synopsys VCS
  
 Legacy Examples
      Graphic Editor
      AHDL
  

Viterbi Tail-Biting Triple-Pass Decoding (P = TB)

This design example shows how to implement a communication system with Altera® DSP Builder blocks. The system consists of a convolutional encoder and Viterbi decoder. The convolutional encoder adopts the trellis termination scheme called tail-biting by initializing the starting state of each packet with the tail bits. On the decoder side, double-pass buffer and output buffer are implemented along with the Altera Viterbi intellectual property (IP) core to decode the received code words properly. In this example, packet size of 48 in the decoder is equal to three times the encoded packet size (P) of 16. You can also compare the performance of bit-error rate (BER) versus Eb/No curves with other design examples. 

Download the files used in this example:

The use of this design is governed by, and subject to, the terms and conditions of the Altera Hardware Reference Design License Agreement.

Files in the zip download include:

  • viterbi_system_triplepass.mdl — DSP Builder design file implementing the Viterbi system 
  • viterbi.vhd — wrapper file to generate Altera Viterbi IP core.
  • init.m — MATLAB script to initialize the sampling time.

Figure 1 shows the top-level diagram of the Viterbi tail-biting system design example in DSP Builder.

Figure 1. Viterbi System Top-Level Diagram

Figure 1. Viterbi System Top-Level Diagram
View Full Size

Figure 2 compares the performance of BER versus Eb/No curves.

Figure 2. BER vs. Eb/No performance curves

Figure 2. BER vs. Eb/No performance curves
View Full Size

Table 1 lists the ports and gives a description for each.

Table 1. Viterbi System Port Listing
Port Name Type Description
datain Input data input to encoder
enain Input enable input to encoder
rst Input reset signal
decout Output data output from decoder
enaout Output enable output from decoder

Related Links

For more information on the related features used in this design example that you can use in your project, go to:

Design Examples Disclaimer

These design examples may only be used within Altera Corporation devices and remain the property of Altera. They are being provided on an “as-is” basis and as an accommodation; therefore, all warranties, representations, or guarantees of any kind (whether express, implied, or statutory) including, without limitation, warranties of merchantability, non-infringement, or fitness for a particular purpose, are specifically disclaimed. Altera expressly does not recommend, suggest, or require that these examples be used in combination with any other product not provided by Altera.

  Please Give Us Feedback